Specifications; Notice Code - Toshiba MMU-UP0091H-E Installationsanleitung

12

Specifications

Sound pressure level (dB(A))
Model
Cooling
MMU-UP0091H-E *
MMU-UP0121H-E *
MMU-UP0151H-E *
MMU-UP0181H-E *
MMU-UP0241H-E *
MMU-UP0271H-E *
MMU-UP0301H-E *
MMU-UP0361H-E *
MMU-UP0481H-E *
MMU-UP0561H-E *
* Under 70 dB(A)
Product information of ecodesign requirements. (Regulation (EU) 2016/2281)
http://ecodesign.toshiba-airconditioning.eu/en
247-EN
Weight (kg)
Main unit (Ceiling panel)
Heating
* 18 (5)
* 18 (5)
* 25 (5)
* 25 (5)
* 25 (5)
* 25 (5)
* 25 (5)
* 25 (5)
* 25 (5)
* 25 (5)
13

Notice code

• Notice code is a function only in TC2U-Link communication.
• When the outdoor or indoor unit detects its conditions requiring caution or maintenance, this function notices you
to check your units with the spanner mark (Notice code mark) on the wired remote controller or central controller
display.
• Even while the notice code mark is displayed, the air conditioner can operate normally.
• A maximum of 5 notice codes can be issued simultaneously in one system (line).
 How to check Notice code No.
1
Stop the operation of the air conditioner and push the Menu button and OFF timer button at the
same time for 10 seconds or more.
2
The unit number of the indoor unit is displayed at the bottom left of the screen.
Change it with the [ ] [ ] setting button and push the OFF timer button to confirm.
3
The history number is displayed in the center of the screen, and the Notice code No. is displayed
in the lower left.
[ ] [ ] You can switch the history with the setting button (a maximum of 5 notice codes).
4
Push the ON / OFF button to return to the operation stop screen.
 Notice code list
Notice code
Item
No.
203 Flow Selector unit battery dead
204 Leak detector life advance display
– 124 –
Notice code mark
Content
The battery kit connected to the Flow Selector unit has reached the end
of its life.
The leak detector will soon reach the end of its life.
248-EN