Prepare Measurement - Sanitas SBM 30 Gebrauchsanleitung

Icons in the display:
1. Change battery icon
2. Error icon EE
3. Systolic pressure
4. Cardiac arrhythmia icon
5. mmHg unit
6. Icon for users 1, 2
7. Diastolic pressure
8. Time and date
9. Number of memory space
10. Pulse icon
11. Measured pulse
12. WHO - classification
13. Memory display day/night (A, P: AM, PM)
8
5
1
9
4
11
EE
2
3
6
12
7
13
10

4. Prepare measurement

Inserting battery
• Remove the battery cover from the
back of the monitor.
• Insert four AAA 1.5 V alkaline
batteries. making absolutely
sure that you insert them with
the correct polarity as marked.
Never use rechargeable bat teries.
• Replace the battery cover carefully.
If the battery change
measure ment is no longer possible and you must replace all
the batteries. Once batteries have been removed from the de-
vice, the time must be reset.
Used batteries do not belong in the household waste. You are
legally obliged to dispose of the batteries. Dispose of them via
your specialist electrical supplier or local collec ting point for
recyclable waste.
Note: Batteries containing pollutant substances
are marked as follows: Pb = Battery contains lead,
Cd = Battery contains cadmium, Hg = Battery
contains mercury.
Setting date and time
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time.
The time is shown in 24 hour format.
13
4 x AAA (LR03) 1,5
is continuously illuminated,