Troubleshooting Table - hanseatic HKGK17954DWDI Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never attempt to repair the appliance yourself. This may put your own and future
users' lives at risk. Only authorised specialists are allowed to carry out this repair
work.
Problem Possible cause
Compressor off, No electricity to socket.
interior light off.
Mains plug is loose.
Compressor off, Desired temperature has
interior light on. been reached.
Appliance cools Temperature has been set
too quickly. too low.
The appliance Temperature has been set
doesn't cool too high.
sufficiently.
Door not tightly closed or
door seal is not completely
tight.
The appliance is near a heat
source.
Food has been stored warm. Only store cooled foods.
Too many goods frozen.
Ambient temperature too low
or too high.
Compressor seems
defective.
Troubleshooting table
Solutions, tips, explanations
Check the socket with another appliance.
Check the tightness of the mains plug.
Further cooling not required. When the
inside temperature rises, the compressor
automatically switches on.
Select a higher setting (see "Setting the
temperature" on page EN-11).
Select a lower setting (see "Setting the
temperature" on page EN-11).
See "Checking and cleaning the door
seals" on page EN-20.
Place insulation plate between the
appliances or change location.
Maintain maximum freezing capacity. The
maximum freezing capacity is shown on
the appliance's type plate.
Adjust the ambient temperature to the
climate category (see "Intended use" on
page EN-4).
Set to the maximum cooling capacity. If
the compressor isn't switching on, please
contact our service department (see
page EN-35).
Page EN-33