hanseatic HKGK17954DWDI Gebrauchsanleitung Seite 70

Page EN-30 Delivery
5. Loosen the screws (36) on the middle
hinge (37) and remove the middle hinge.
Retain the three washers (38).
6. Remove the freezer door (8) and set it
aside.
(39)
7. Lift out the two blind plugs (39) and rein-
sert them on the opposite side.
8. Tilt the appliance so that the lower
hinge (41) can be accessed using the
cross-tip screwdriver or the size 8 span-
ner.
(40)
9. Loosen the screws (40) on the low-
er hinge (41), unscrew the right screw
foot (9), and remove the hinge.
10. Screw the screw foot (9) back in.
(41)
(9)
(9)
(42)
11. Loosen the screw (42) and screw it in on
the opposite side.
Preparing the hinges
(43)
(41)
1. Using the size 10 spanner and pliers,
loosen the nut (44) for the hinge pin (43)
on the lower hinge (41) and remove it to-
gether with the snap ring (45).
(43)
(41)
2. Flip over the hinge (41) and screw the
hinge bolt (43) back in.
(45)
(44)
(45)
(44)