Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display indications
Open window detection
This heater includes an open window detection function. If the control system
detects that the room temperature drops drastically in a short period of time while
the heating is in operation, it automatically detects that a window is open. The
open window indicator starts flashing in the display, the heating switches off for
30 minutes and automatically returns to the previous setting after 30 minutes.
You can switch this function on and off by pressing and holding the "-" key for
5 seconds, whereupon the open-window indicator in the display appears or
disappears accordingly.
Temperature calibration
Press and hold the + button for 5 seconds to enter temperature calibration. Adjust
the temperature calibration by pressing the + or - buttons. The calibration range is
between -5 and +5 degrees.
Resetting the Wi-Fi
Turn on the appliance and press the WLAN button for 5 seconds until the WLAN
indicator starts flashing and the WLAN connection is reset.
Switching the WLAN function on/off
Press the timer button for 10 seconds to switch off the WLAN function of the
heater. The WLAN indicator in the display disappears. Press the timer button for
10 seconds to switch the WLAN function back on.
1
Weekday
2
Open window display
3
Timer display
4
WLAN display
5
Time
6
Temperature
7
Modes:
M = Manual mode
P = Programme duration (P1-P4)
H = Holiday mode
EN
23
Werbung
Inhaltsverzeichnis
