Herunterladen Inhalt Inhalt Diese Seite drucken

Klarstein TAAL SMART Bedienungsanleitung Seite 19

Infrarot-heizung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
If the power cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualifi ed person to avoid a hazard.
DO NOT operate the heater in small rooms if there are people in the room
who are not able to leave the room on their own. The surface of the heater
can reach a surface temperature of up to 95 °C. Make sure that the appliance
is out of reach of children and people with disabilities.
Keep babies and children away from all packaging materials such as plastic
bags to avoid choking hazards.
Electrical safety regulations
Switch off and unplug the heater before installation, repair or maintenance.
Before installation, make sure that there is no damage to the unit.
If the heater or the mains cable is damaged in any way, DO NOT use
the heater. Contact the manufacturer or customer service for repair or
replacement of the unit. Repairs, maintenance or modifi cations may only be
carried out by the manufacturer, customer service or qualifi ed specialists.
DO NOT attempt to repair the heater yourself as this will invalidate the
warranty.
If the heater has been dropped, DO NOT operate it and contact the
manufacturer or after-sales service to ensure that there is no damage.
This heater is designed for operation with 220-240 V, 50 Hz AC. If your mains
supply does not meet this requirement, DO NOT use the appliance.
The heater must not be located directly below a socket.
WARNING
Risk of injury! The heater must not be used if the glass surface is
damaged.
WARNING
Risk of injury! Do not use the heater in small rooms if there are
people in them who are not able to leave the room independently,
unless permanent supervision is ensured.
EN
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1004186910041870

Inhaltsverzeichnis