Warranty; Wear Parts; Ec Declaration Of Conformity - Solo 879-14 Gebrauchsanweisung Und Originalbetriebsanleitung

9 Warranty

We warrant perfect quality and assume the costs
for any subsequent improvement by replacement
of defective parts in case of material or production
errors that occur during the warranty period after
the day of sale.
Please observe that specific warranty conditions
apply in some countries. In doubt, ask your
vendor. He as a vendor of the product is
responsible for the warranty.
Please understand that we cannot assume any
warranty for the following damage causes:
x Failure to follow the operating instructions.
x Failure to perform required maintenance and
cleaning.
x Damage due to improper carburettor settings.
x Normal wear and tear.
x Obvious overload.
x Use of other than approved working tools.
x Application of force, improper treatment,
misuse, abuse or accident.
x Overheating damage due to contamination of
the fan housing.
x Actions performed by unqualified staff, improper
repair attempts or repairs by unauthorised
personnel.
x Use of unapproved replacement parts or other
than original parts if they caused the damage.
x Use of unsuitable or outdated operating
materials.
x Damage due to the usage conditions from
renting.
Cleaning, care and adjustment work are not
deemed warranty services.
Warranty services must be ordered from a
specialist workshop authorised by us.

10 Wear parts

Several components are subject to wear in
operation or regular wear and may have to be
replaced in time.
The following wear parts are not subject to the
manufacturer's warranty:
x Operating materials
x Air filter
x Fuel filter
x Clutch
x Spark plug
x Starting device
x Cut-off wheel

11 EC declaration of conformity

SOLO Kleinmotoren GmbH, Stuttgarter Str. 41,
71069 Sindelfingen, GERMANY, declares that
the following machine as delivered complies with
the provisions in implementation of the following
EC directives: 2006/42/EC, 2000/14/EC
(Annex V) and 2004/108/EC
Product designation:
Type designation
Trade designation:
Applied standards: EN ISO 19432:2012,
EN ISO 12100:2010, EN 55012:2007+A1:2009
Valid for machines as of serial number:
8791200-0914-001001, 8791400-0914-001001
and the following serial numbers.
Sound power level pursuant to 2000/14/EC:
warranted: 110 dB(A), measured: 108 dB(A)
Storage site for the technical documents
pursuant to 2000/14/EC and 2004/108/EC:
SOLO Kleinmotoren GmbH, Stuttgarter Str. 41,
71069 Sindelfingen, GERMANY
This declaration of conformity loses its validity
when the product is converted or modified
without agreement.
Sindelfingen, 31.07.2014
Wolfgang Emmerich
Director andexecutive officer
Warranty
Cut-off machine
08
879
ENGLISH 39