Progress PBP23101X Benutzerinformation Seite 10

Clock func‐
tion
MINUTE MIND‐
ER
00:00
COUNT UP
TIMER
7.2 Setting and changing the time
After the first connection to the mains, wait
until the display shows
flashes.
1. Press or to set the hours.
2. Press to confirm and set the minutes.
The display shows
"00" flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day
will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
7.3 Setting the DURATION function
1. Set a heating function.
2. Press again and again until
to flash.
3. Press or to set the minutes and
then the hours. Press
When the set Duration time ends the signal
sounds for 2 minutes.
10 ENGLISH
Application
Use to set a countdown time.
This function has no effect on
the operation of the oven.
You can set the MINUTE
MINDER at any time, also if
the oven is off.
If you do not set any other
clock function the COUNT UP
TIMER automatically monitor
how long the oven works.
It is on immediately when the
oven starts to heat.
The Count Up Timer cannot
be used with the functions:
DURATION, END.
and "12:00". "12"
and the set hour.
again
starts
to confirm.
and time setting
flash in the display. The oven turns off
automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knob for the heating functions to
the off position.
7.4 Setting the END function
1. Set a heating function.
2. Press again and again until
to flash.
3. Press or to set the hours and then
the minutes. Press
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knob for the heating functions to
the off position.
7.5 Setting the TIME DELAY function
1. Set a heating function.
2. Press again and again until
to flash.
3. Press or to set the minutes and
then the hours for DURATION time.
Press to confirm.
The display shows flashing
4. Press or to set the hours and then
the minutes for END time. Press
confirm. The display shows
the set temperature.
Oven turns on automatically later on, works
for the set DURATION time and stops at the
set END time.
At the set END time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off.
5. Press any button or open the oven door
to stop the signal.
6. Turn the knob for the heating functions to
the off position.
starts
to confirm.
starts
.
to
and