Dantherm HCH 5 Kurzanleitung Seite 8

How to replace the supply fan,
Procedure, continued
Wiring diagram
8
Step
12 Lead the cables through and lift out
the fan.
NB: Save the cable fittings!
13 Install the new fan in the house by screwing it firmly with 4 Torx 20
14 Lead the wires through the house and mount the wire fittings from step 10
15 Strips the wires again, so they do not enter the fan during operation
16 Put the supply fan in place in the unit
17 Reconnect all earth cables and the cables on the print, see also the wiring di-
agram at the end of this instruction
18 Remount the styrene front, the cross bars and the front cover
19 Connect the power again
continued
Action