Operation - Silvercrest SSK 160 A1 Bedienungs- Und Sicherheitshinweise

Cleaning and storage
mWARNING! Risk of
injury! Disconnect the product
from the power supply before
cleaning or when it is not in
use .
Do not store the hot product
in a wardrobe or in the
packaging .
Do not unplug the plug from the
socket-outlet by pulling on the
cable .
Protect the product, the cable,
and the plug from dust, direct
sunlight, dripping, and spraying
water .
Store the product in a dry,
cool location, protected from
moisture and out of the reach of
children .
Protect the product from heat .
Do not place the product near
open flames or sources of heat
such as ovens or heaters .
40 GB/MT
˜ Before first use
Remove all packing materials before use .
˜ Operation
Turning on the product:
– Connect the power plug
socket-outlet .
– Press the on/off switch
The indicator lamp
The product is in standby mode .
– Press the indicator lamp
The indicator lamp lights up red .
The product is now in hot air mode .
Turning off the product:
– Press the indicator lamp
cold air mode .
The indicator lamp lights up blue .
– Press the indicator lamp
to standby mode .
The indicator lamp flashes blue .
– Press the on/off switch
The indicator lamp
– Disconnect the power plug
socket-outlet .
to a suitable
15 ] [
.
14 ] [
flashes blue .
6 ] [
.
6 ] [
to switch to
[ 6 ]
again to switch
[ 6 ]
.
[ 14 ]
goes off .
[ 6 ]
from the
15 ] [