Pari LC PLUS 022 Gebrauchsanweisung Seite 60

Using accessories
Information on assembling accessories is included in the in-
structions for use of the respective accessory
Filling the nebuliser
• Insert the nebuliser in the holder on the compressor in-
tended for this purpose.
• If applicable, detach the inhalation valve from the nebuliser.
• From above, pour the required
quantity of inhalation solution
into the nebuliser.
Be sure to follow the instruc-
tions regarding the minimum
and maximum fill volumes
[see: General nebuliser data,
page 39]. If the nebuliser con-
tains too little or too much li-
quid, the nebulisation and con-
sequently the therapy will be
less effective.
• Push the inhalation valve onto
the nebuliser.
3) Instructions for use of accessories are included with the respective
accessory. They can also be ordered from the manufacturer or distributor.
– 16 –
3
.