Use; Preparing For Treatment; Assembling The Nebuliser - Pari LC PLUS 022 Gebrauchsanweisung

3

USE

All the steps described below must be carried out correctly.
If the nebuliser is to be connected to a central gas supply sys-
tem via a PARI CENTRAL, the instructions for use of the
PARI CENTRAL must be followed.

3.1 Preparing for treatment

Assembling the nebuliser

CAUTION
Risk of impaired treatment
Damaged components and/or an incorrectly assembled
nebuliser may impair functioning of the nebuliser and thus
treatment as well.
• Check all nebuliser components and the accessories be-
fore each use.
• Replace any broken, deformed or seriously discoloured
parts.
• Follow the assembly instructions in these instructions for
use.
• Insert the nozzle insert into the
nebuliser lower part.
• Gently twist the nozzle insert
clockwise to lock it in place.
– 14 –