Display; Basic Operation - WIKA CPH 6200 Betriebsanleitung

Hand-Held Pressure Indicator
CPH 6200 / CPH 6200-D / CPH 6200-Ex
GB
8

1.4 Display

7
8
1. Main display: shows the current measured value of CH1.
2. : indicates a low battery and other warnings.
3. Lower display: For 2-channel version shows the measured
value of CH2 or DIF (CH1-CH2). For 1 channel version it
displays the min, max or hold function values.
4. Logg: Shown if logger function is selected, flashes if cyclic
logger is running.
5. AL: flashes if alarm is present.
6. Tara: indicates that tare function is activated.
7. Measuring unit: An arrow points to the chosen measuring unit.
8. SL: indicates, that the sea level function is activated.

1.5 Basic operation

On turning the device on; if the logger function is selected, the
integrated clock's time will be displayed briefly. If a zero point
adjustment has been carried out, the display will indicate this by
showing "nuLL Corr".
After changing the battery the menu for setting the clock is
activated automatically ('CLOC'). Check the clock and adjust if
necessary (see Section 2).
1
2
WIKA Operating Instructions Hand-Held Pressure Indicator
5
5
1
2
3
4
5
6
3
4