WIKA CPH 6200 Betriebsanleitung Seite 18

Hand-Held Pressure Indicator
CPH 6200 / CPH 6200-D / CPH 6200-Ex
GB
18
If the logger memory is full, the display will show:
Recording will be stopped automatically.
If the Low-Power-Logger-Function is selected ("Lo.Po = on") the
device switches itself off as soon as the memory becomes full.
Stopping the logging manually:
By pressing the ´Store/Quit´ key, recording can be manually
interrupted. The following choice then appears:
Stop
recording
The selection can be made by key: ´Max´ and key: ´Min´ key:
´Store/Quit´ enters the choice.
If you try to switch off the instrument during a logging cycle, you
will also be asked if you wish to stop recording. The device can
only be switched off after the recording has been stopped!
The Auto-Power-Off-function is deactivated during logging!
Clear Data:
When the ´Store/Quit´ key is pressed for 2 seconds, the option to
clear the logger memory will be displayed:
clear all
data points
The options are selected by the ´Max´ key and the ´Min´ key.
´Store/Quit´, confirms the choice.
WIKA Operating Instructions Hand-Held Pressure Indicator
Do not stop
recording
clear nothing
(cancel opera
tion)