Calibration Services; Specification - WIKA CPH 6200 Betriebsanleitung

Hand-Held Pressure Indicator
CPH 6200 / CPH 6200-D / CPH 6200-Ex
GB
24

9. Calibration services

DKD-certificates - other certificates:
If the instrument requires calibration, we recommend returning it, along
with its associated sensors, to the manufacturer. Only the manufacturer is
able to verify the instrument's basic settings and configuration, and if
necessary correct them.
10. Specifications
Input
Pressure range in bar
Overpressure safety in bar
Burst pressure in bar
Resolution in mbar
Pressure range in bar
Overpressure safety in bar
Burst pressure in bar
Resolution in bar
Type of pressure
Accuracy of the
measuring chain
Calibration*
Display
Range of display
Units
CPH 6200 Digital Instrument specific details:
Functions via key press
Functions via Menu
Data logger
Interface (serial)
1)
Power supply
Power consumption
Working temperature
Air humidity
Storage temperature
Housing
Weight
EMV- / CE-conformity
1) For the Intrinsically Safe Version, the use of the interface is not permitted within an explosive
atmosphere.
*) Calibrated in vertical mounting position with lower pressure connection.
**) Not available for the Intrinsically Safe Version CPH 6200-Ex.
{} Items in curved brackets are optional extras at an additional price.
WIKA Operating Instructions Hand-Held Pressure Indicator
1: for CPH 6200 / CPH 6200-Ex;
0.1 0.16 0.25 0.4 0.6
1 1.5 2 2 4
2 2 2.4 2.4 4.8
0.1
10 16 25 40 60
35 80 50 80 120
42 96 250 400 550
0.01
gauge {absolute 0.25 up to 16 bar & vacuum on request}
0.2 % FS +/- 1 digit at reference temperature of 20 °C
factory calibration certificate (optional: DKD calibration certificate)
large LCD display for display of 2 four-digit values and additional
information
max. -1999 up to 9999, depending on sensors used
can be selected from the following: mbar, bar, Pa, kPa, MPa, mmHg,
psi (dependent on range)
Min-, Max-memory, Hold, Tare, Offset-correction, Logger (Start/Stop)
Min-, Max-alarm (acoustic**/visual), Sea level (barom. air pressure),
Power-Off-Function, measuring rate: 4/sec ("slow"); > 100/sec
("fast"); > 100/sec unfiltered ("peak-detect") [via "peak-detect" and
min-/max-memory: pressure peaks of 10 msec can be detected]
- discrete value logger: up to 99 data points (incl. Time stamp) via key press
- cyclic logger: automatic logging of up to 5400 values incl. time.
Cycle time: selectable between 1 ... 3600 seconds
RS-232 interface via interface converter {USB adapter on request}.
9V-zinc-carbon battery, alternative**: 9V rechargeable battery or
mains supply
Cycle time slow: < 1.5 mA, fast: < 3.0 mA, Low-Power-Logger-Fct.: < 0.1 mA
0 ... 50 °C
0 ... 95 % relative humidity without moisture condensation
-20 ... +70 °C
Impact-resistant ABS, membrane keyboard, transparent panels
(CPH 6200-Ex with cover)
Approx. 160 g
The CPH 6200 device corresponds to the essential protection
requirements established in the regulations of the council for the
Approximation of Legislation of the member countries regarding
electromagnetic compatibility (89/336/EWG).
2: for CPH 6200-D
1.0 1.6 2.5 4.0 6.0
5 10 10 17 35
6 12 12 20.5 42
1
100 160 250 400 600
200 320 500 800 1200 1500
800 1000 1200 1700 2400 3000
0.1
1000
1