Comelit UT9260M Programmieranleitung Seite 19

• Backlight adjustment: adjust the brightness of the Number keypad backlighting (from 0 to 100, default: 50)
• Enable calls: the Number keypad can also be used to call users when the code is known (enabled by
default)
• Clock input: This function uses the internal Number keypad clock (or an external clock) to enable the
"Key" button to activate Relay 1 in specific time bands, or to authorise opening by means of an access
code only in specific time bands
◊ Disabled: the Clock input is ignored
◊ Enabled: when the "Key" button is pressed, Relay 1 is activated (default)
◊ Paired with "Relay 2 functions": Clock input behaviour depends on "Relay 2 functions" menu settings
• Relay 2 functions: this menu is only present if the option "Paired with Relay 2 functions" has been
selected in the "Clock input" menu
◊ Disabled: the function is not enabled (default)
◊ Enabled if Clock input on: when the "Key" button is pressed, Relay 2 is only controlled if the Clock input
is active
• Action 1 (2, 3, 4) Universal Code: the Universal Code can be assigned up to 4 different actions which will
be carried out consecutively (function only available if the Directory is used in conjunction with the Number
keypad)
◊ Action
- Audio call: when the access code is entered on the Number keypad, an audio call is made to the
address entered in the "Address" field
◊ Address: select the address to which you want to make the audio call (from 1 to 240)
◊ Number of calls: select the number of calls to make to the address entered in the "Address" field
(System settings or from 1 to 10)
- Video call: when the access code is entered on the Number keypad, a video call is made to the
address entered in the "Address" field
◊ Address: select the address to which you want to make the video call (from 1 to 240)
◊ Number of calls: select the number of calls to make to the address entered in the "Address" field
(System settings or from 1 to 10)
- Activate Number keypad relays: enter the access code to activate the Number keypad relays
◊ Select relay: select the relay you want to activate (Relay 1 or Relay 2)
- Actuator control: enter the access code on the Number keypad to activate an actuator
◊ Address: select the address for the actuator art. 1256 you want to activate (from 1 to 255)
- Control on Ultra bus (UDB): enter the access code on the Number keypad to send a command over
the Ultra bus
◊ Type: select the module to which you want to send the command over the Ultra bus (UDB). Choose
from Audio/video module or Number keypad
◊ Output: select the output to be controlled, choosing between Audio/video module SE output and
Module relay output if the Audio/video module option has been selected under "Type". Select the output
to be controlled, choosing between Relay 1 and Relay 2 if the Number keypad option has been selected
under "Type"
• None: select this option to disable actions
19