WELCOME MESSAGE
•
Enable: enable Welcome message display
•
Message header: free area for entering the welcome message header
•
Welcome message: free area for entering the welcome message
SWITCHBOARDS
•
Enable Switchboard 1: enable switchboard call key display. If there is only one enabled switchboard,
pressing the key will send the call instantly
•
Switchboard 1 name: enter the name to be displayed for switchboard no. 1
•
Switchboard 1 address: enter the call address for switchboard no. 1
•
Enable Switchboard 2: enable switchboard call key display. If there is only one enabled switchboard,
pressing the key will send the call instantly
•
Switchboard 2 name: enter the name to be displayed for switchboard no. 2
•
Switchboard 2 address: enter the call address for switchboard no. 2
SCREENSAVER
The display can be enabled to show a default screensaver, or a custom one can be loaded
•
Enable screensaver: this option is used to enable the screensaver function (disabled by default)
•
Screensaver activation or standby time (s): this option can be used to set the time which must have
elapsed since the last procedure before the screensaver is activated or the display enters standby mode
(from 10 to 60 seconds, default: 20 seconds)
•
Screensaver 1
•
Screensaver 2
To load a screensaver image, right-click in the box on the left and select the "Load" menu; select the desired
image using the window shown.
Note
•
Compatible formats are .jpg, .jpeg, .png.
•
The compatible size is 320 x 240 pixel
16