Example 1: Setting First The Opening Position - cherubini BLUE TRONIC RX-Serie Einstellanleitungen

example 1:
Setting first the opening position
Hold the button A or C pressed and drive until the complete opening position.
with physical stops: press button A or C until the motor stops automatically.
without physical stops: use the button A or C to drive to the necessary opening
position.
if the rolling shutter is completely open, you have firstly to drive down by
around 20 cm.
To set the opening position, press buttons A (up) and C (down) simultaneously for about
2 seconds, until the motor automatically performs a short "down" movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
A
C
pressing now the button C, drive completely down the rolling shutter to the closing position.
with lockdown hangers: press button C until the motor stops automatically.
without lockdown hangers: use the button C and A to drive on the necessary closing
position.
To set the closing position, press buttons B (stop) and C (down) simultaneously for about 2
seconds, until the motor automatically performs a short "up" movement.
This move is the visual confirmation of the setting operation.
Tn: Already programmed remote control
C
SETTInG THE OpEnInG pOSITIOn
?
SETTInG THE CLOSInG pOSITIOn
Tn
A
+ B
Tn (2 sec)
B + C
Tn (2 sec)
31
confirm
confirm