Closing Force Adjustment; Deleting The Opening And Closing Limit Switch - cherubini BLUE TRONIC RX-Serie Einstellanleitungen

B + C
Tn (max 0,5 sec)
This system is the only one of its kind and it guarantees
that rolling shutters (which are equipped with
lockdown hangers) remain perfectly closed without
any danger of the slats suffering excessive pressure.
The system works in all kinds of applications because
of the opportunity of manually adjusting the closing
force.
The Blue Tronic RX is factory set to a closing force of 20% of the nominal torque. This
force can be changed very easily by the remote control. It can be reduced by 10% or
increased up to 40%, depending on the desired result.

deleTing The opening and cloSing limiT SwiTch

Tn: Already programmed remote control
B + C
Tn

cloSing force adJuSTmenT

A
B + C
40 %
20 %
10 %
Tn
35
A
B
C
B + C
Tn (4 sec)