Parkside 393778 2104 Bedienungs- Und Sicherheitshinweise Seite 26

7. Select the watering cycle with the rotary button (e. g. 2nd)
and confirm by pressing the SET button
Remark: 24h / 2nd / 3rd / 4th / 5th / 6th / 7th means:
Watering every 24 hours / every 2 / 3 / 4 / 5 /
6 / 7 days.
The week preview will be displayed in the left hand column.
The display on the "Prog" will flash on screen.
If you finish step 7, please jump to step 9.
8. Turn the rotary button until the cursor on the "watering
days" section flash.
Select each watering day and confirm by pressing the
SET button
After select the watering days, press the
final confirm.
The display on the "Prog" will flash on screen.
9. Select the "Prog ON" with the rotary button and confirm
by pressing the SET button
you don't want to activate the program at this moment).
After setting up the first program, the system will now jump
back to step 2, so you can set up program No. 2–6.
When you have finished setting up the programs, you can
press the
mode and go back to the normal operation mode.
26 GB/IE/NI
(see Fig. 11).
4
(ON/OFF) button
4
(or you can select OFF if
4
to exit the programming
7
(see Fig. 10).
button to
6