Parkside 393778 2104 Bedienungs- Und Sicherheitshinweise Seite 22

Note: Such mains adapters are available from speciality
retailers.
Check the water connection type available. The product is
fitted with a union nut for a tap with a 33.3 mm thread
1
(G 1 ). For a tap with a 26.5 mm thread (G ¾ ) use the
adapter supplied .
10
Insert the filter into the union nut as depicted in
9 1
Figure A.
For a 26.5 mm thread (G ¾ ): Screw the adapter onto
10
the tap. Do not use any tools for this purpose.
Screw the union nut onto the thread of the tap or the
1
adapter. Do not use any tools for this purpose.
Screw the adapter onto the hose connection. You can
11
then connect a hose to the adapter .
11
Open the tap.
ATTENTION! If defects / leaks arise when using the adapter
, the thread of the tap must be wrapped using sealing tape.
10
Programme irrigation as described in the chapter "Operation".
22 GB/IE/NI