Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Regularly check the power
plug and the power cord for
damages . If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
Operation
m WARNING! Risk of fire
and injury! Never use the
product to absorb
–
water and any material with
a temperature exceeding
+40 °C,
–
incandescent materials .
Disconnect the product from the
power supply
–
when a malfunction occurs,
–
before attaching/changing
accessories,
–
before cleaning the product,
–
if you will not use the product
for a long time,
–
during a thunderstorm and
–
after each use .
Disconnect the product from
the power supply by pulling the
power plug, but not by pulling
on the power cord .
Defective components must
always be replaced by original
spare parts .
Do not obstruct the ventilation
slots during operation . Risk of
overheating and damage to the
product .
Make sure that the mains
voltage corresponds with the
information on the rating plate .
GB/IE/NI
13
Werbung
Inhaltsverzeichnis
