Troubleshooting; Warranty; Ce Declaration Of Conformity; Environmentally-Friendly Disposal - Wolf Garten LT 25 eM Originalbetriebsanleitung

EN
Risk of injuries or material damage
¾ In case of doubt always consult a specialist workshop.
¾ Before any inspection or any work on the device, switch off the motor and remove the operating
arm.
Problem Possible cause
The device switch- The power pack is too hot.
es off.
The power pack is discharged.
The temperature of the device (electronics)
is too high.
Overcurrent release
The device will not The power pack is discharged.
switch on.
Overcurrent release
Power pack temperature too high or too low. Allow the power pack to cool down or heat
The power pack is defective.
Automatic line The spool is empty.
adjustment does
The toothing between the line box and the
not work.
line spool is dirty.
The line has torn off and is pulled into the
line spool.
The line has become caught in the spool.
The line is welded onto the spool.
The line breaks off The line comes into contact too frequently
too frequently. with fixed objects, e.g. fences, trees, etc.
Strong vibrations Device fasteners have come loose.

Warranty

The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.

CE Declaration of Conformity

Further details about the device are con-
tained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
26

Troubleshooting

WARNING!
Remedy
Allow the power pack to cool.
Charge the power pack.
Allow the device to cool and if necessary,
clean the ventilation slots
If this occurs again take your device to a
specialist workshop.
Charge the power pack.
If this occurs again take your device to a
specialist workshop.
up.
Arrange for the power pack and operating
arm to be checked by a specialist workshop.
Replace the line spool.
Use a brush to remove dirt from the parts.
Take off the line spool, if necessary rewind
the line by gently pulling and insert the spool.
Remove the welded line part, if necessary
rewind the line by gently pulling and insert
the spool.
Maintain a sufficient distance away from
objects.
Consult a specialist workshop.

Environmentally-friendly disposal

Power tools, accessories and packaging must be
disposed of via an environmentally compatible recy-
cling chain.
Power packs/batteries:
Do not dispose of power packs/batteries
in domestic waste, by burning or throwing
into water. Power packs/batteries must be
collected, recycled or disposed of in an
environmentally-friendly manner.
Power tools (without power packs/
batteries):
Do not throw your old power tool away
with the domestic waste. Take it to a
disposal facility.
Troubleshooting