Carrier XCT7 40VCC837FQEE Installationshandbuch Seite 16

Function operation
Indoor units parameter and control
To see the setting for each indoor unit, tap on Air Conditioning. The icons (shown in Picture 4) indicate
the On/Off Mode, Set Temp, Ambient Temp, Fan Speed and Control Mode of the connected indoor
units.
Deep Blue is Auto Mode
Purple is Dehumidify Mode
If there's any indoor fault, ERROR icon will show on the controller.
Enter the following interface, the icon type shows ON/OFF, mode, setting temperature, ambient
temperature, wind speed and control mode. Deep blue is the AUTO mode, light blue is cooling, Orange
is heating, Purple is dehumidification, Green is the air supply and the Grey is shutdown. If there is a
failure, the fault icon is displayed.
Current indoor unit quantity. Default is all the existing indoor units.
To view, you can slide up and down. You can click on the second
icon below to select the indoor units you want to view
Click to return to home
Click to select the indoor
units you want to view
Light Blue is Cooling Mode
Green is Fan Mode
Picture 4
8
Orange is Heating Mode
Grey is Indoor unit OFF
Time, to adjust the time through
"Home-Setting-Time".
Click to show the control list.
List display interface
Icon display interface