clage M3 Montageanleitung Seite 26

EN
Installation
a
b
c
e
Fig. 5: "Connecting the water pipes"
6. Make sure that the water pipes do not apply any kind of mechanical pressure on the instan-
taneous water heater.
7. Open the hot water valve of the tap and check all connections for leaks.
8. In order to obtain an optimum water jet at low flow rates, screw the enclosed special tap
aerator into the tap outlet. The tap aerator fits into commercially available sleeves with a
M22 or M24 thread.
a. Seal
b. Filter
c. Cold water connection (inlet)
d. Hot water connection (outlet)
a
e. Rating plate cover
d
26