Control Panel And Button Functions - Klarstein LIMELIGHT 120 Bedienungsanleitung

• If the cooker hood is used in recirculation mode, a room air dependent fire
can be operated at the same time.
• It is recommended to switch on the appliance a few minutes before starting
to cook.
• To improve the performance of the extractor hood, pull out the extractor hood
(if available).
• Set the power level according to the amount of smoke and odour to be
extracted.
• Leave the cooker hood running for approx. 5 to 10 minutes after cooking. This
frees the kitchen air from residual vapours and odours.

CONTROL PANEL AND BUTTON FUNCTIONS

ON / OFF:
Press this button to switch the appliance on or off.
Low speed setting
Medium speed setting
High speed setting
Light on/off
Digital display - Display of the fan speed:
"1" for low speed
"2" for medium speed
"3" for high speed
Delay shutdown: At working mode, long press
5 minute delay. Long press
Booster function (only 10041228): Long press
display shows "B". After 5 minutes, the speed automatically changes to level 3.
and
and to cancel the delay.
to active booster function,
to turn on a
EN
51