Maintenance And Cleaning; Cleaning; Maintenance Interval Table - FLORABEST FKS 2200 B1 Originalbetriebsanleitung

Maintenance and

cleaning

Basically, carry out mainte-
nance and cleaning works with
switched-off motor and power
plug removed. Danger of injury!
Leave any maintenance and
servicing work not covered by
this manual to our Service-Cent-
er (see P. 109 for the address).
Use only original spare parts.
Allow the machine to cool down
before all maintenance and
cleaning works. Danger of burn
injuries!

Maintenance Interval Table

Machine part
Components of the
chain brake
Sprocket chain wheel
Saw chain (5)
Guide bar (4)
Cleaning
•
•
•
•
Action
Check, replace if required
Check, replace if required
Check oil, regrind or
replace if required
Check, turn round, clean
and oil
Clean the machine thoroughly after
every use. In this way, you extend
the life of the machine and avoid ac-
cidents.
Keep the gripping handles free of gas,
oil or grease. Clean the gripping han-
dles, where appropriate, with a moist
cloth soaked in soap. Use no solvents
or gas for cleaning!
Clean the saw chain after every use.
Use a paint brush or whisk for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
Before
every use




GB IE
After 10 hours
of operation

19