Cleaning And Maintenance - Klarstein LAMINGTON Bedienungsanleitung

EN
32
Notes:
1. If the indicator does not light up on the screen, the timer setting for the
selected date is invalid.
2. If you do not press the
only.
3. Press the button
to reset all timer and temperature settings to factory settings.
4. If no button is pressed for 15 seconds, the backlight turn off .
Changing the battery of the remote control
• Replace an empty battery with a new CR2025 battery. Follow the instructions
on the back of the remote control to insert the new battery.
Overheating protection
• This appliance is equipped with an overheating protection which is activated
in case the appliance overheats (for example, due to blocked air vents). For
safety reasons, the unit is not automatically reset.
• To reset the appliance, disconnect the appliance from the power supply for at
least 15 minutes.

CLEANING AND MAINTENANCE

WARNING
Electrocution and fi re hazard! Before cleaning or servicing the
appliance, switch it off and disconnect the power cord from the
wall socket. Maintenance should only be carried out by a qualifi ed
specialist.
Cleaning the glass panel
• Wait until the appliance has cooled down completely before cleaning it.
• Remove dust with a dry cloth.
• Remove fi ngerprints and other dirt with a clean, damp cloth.
• Do not use abrasive cleaners or sprays on the glass surface.
• Metal and painted metal parts should only be cleaned with a clean, damp
cloth. Do not use abrasive cleaners or sprays to clean these surfaces.
OK
button, the setting is saved for the current day
for 5 seconds when the appliance is in standby mode