Operation - Klarstein FULL HOUSE 3.0 Bedienungsanleitung

OPERATION

Getting Started
1
Touch the On/Off button
on the hob control panel.
After switching on, the
unit beeps once and "-" is
displayed on all screens.
The device is now in
standby mode.
Select the desired heating setting.
• If no heat level setting is selected within one minute, the device will turn off
automatically. In this case, start again at step 1.
• You can adjust the heat setting at any time during the cooking process.
• Pressing one of the corresponding buttons either increases or decreases the power.
2
Place suitable cookware
on the hob that you want
to use.
Make sure that the hob
and the underside of the
cookware are clean and
dry.
4
3
When you touch the
heating field selector, an
indicator light will flash
next to the button.
Select the desired cooking
zone.
EN
65