Klarstein FULL HOUSE 3.0 Bedienungsanleitung Seite 76

EN
76
Problem Possible cause
The unit emits The fan built into the unit has
fan sounds. switched on to prevent the
electronics from overheating.
It may happen that the fan
continues to run for some time
after you have switched off
the unit.
The pots do not 1. The appliance cannot
heat up. detect the pot because it is
not suitable for induction.
2. The appliance cannot
detect the pot because
the pot is either too small
for the hob or is not in the
centre of the hob.
The appliance Technical error.
or hob has
unexpectedly
switched itself
off, a sound is
heard and an
error code is
displayed.
Potential solution
This is normal and does not
require any action. Do not
disconnect the device from the
power supply while the device's
fan is still running.
Place the pot in the centre of
the hob and make sure that the
dimensions of the bottom are
suitable for the hob.
Please write down the error
code, unplug the device and
contact customer service.