Product Overview; Grain Size And Speed Level; Using The Tool; Intended Use - Pattfield Ergo Tools PBS900G Originalbetriebsanleitung

1
2
3
4
9
10
104 EN

Product overview

1x
1 Dust bag
2 Handle
3 On/off switch
4 Drive wheel
5 Sanding belt
6
Belt release lever
7 Speed control
8
8 Auxiliary handle
9 Dust port
7
10 Belt run adjust knob 1x
11 Power cord
12 Lock on button
6
5

Grain size and speed level

Depending on the operation purpose, choose
12
the correct grain size and speed level from the
table below:
MATERIAL LEVEL
Solid 5-6
Veneer 2-4
Chipboard 1-5
Plastics DE Lieferumfang 2-5
11
Steel 5-6
Paint Removal FR Etendue de livraison 6
Balsa Wood 1-3
IT Materiale compreso nella fornitura
NL Leveringsomvang
SV Leveransomfång
CZ Rozsah dodávky
SK Rozsah dodávky
RO Volumul livrat
GB Scope of delivery

Using the tool

1x
1. Place the tool on the workpiece so that the
complete sanding belt is in contact. Make
sure your workpiece can not slip.
2. To switch on the tool, press the lock on
button 12 and press and hold the on/off
switch 3. Start working, while holding the
tool firmly with both hands.
3. Move the tool slowly over the workpiece in
parallel lines and successive passes.
4. To switch off the tool, release the on/off
switch 3.
Warning! Only switch the tool on
when the sanding belt is in full con-
tact with the workpiece.

Intended use

The tool is intended for dry sanding of wood,
plastic, metal, filler as well as coated surfaces.
The tool is not intended for commercial use.
Any other use or modification to the tool is
BELT GRIT considered as improper use and could cause
80 considerable dangers.
150
60/80
100
80
46/60
100
EN 105