Product Overview; Before Use; Intended Use - Pattfield Ergo Tools PE-150DS Bersetzung Der Originalbetriebsanleitung

1
2
3
4
5
1
3
120 EN
10
9
8
7
6
2
2 mm 2 mm
4
< 2 mm < 2 mm

Product overview

2x
1 Eye shield (2x)
2 Wheel guard (2x)
3 Grinding wheel coarse-grain
4 Wheel guard securing bolts (6x)
5 Power plug
6
Mounting holes (one at each corner)
7 ON/OFF switch
8 Work rest screws
9 Work rest
10 Grinding wheel fine-grain

BEFORE USE

1 DE Secure the grinder through the mount- Lieferumfang
ing holes 6 to a bench with suitable
FR screws, nuts or bolts (not included). Etendue de livraison
IT Materiale compreso nella fornitura
NL Leveringsomvang
SV Leveransomfång
3 Mount the mounting brackets to the
CZ grinding wheel guards 2. Rozsah dodávky
SK Rozsah dodávky
RO Volumul livrat
GB Scope of delivery

Intended Use

1x
The tool is intended for dry grinding only.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
2 Attach the work rest 9 with its screws.
Adjust the gap between workpiece
support and grinding wheel 3 or 10
to 2 mm. Ensure that the work rest
is not tilted upwards and tighten the
work rest screws 8.
4 Fit the eye shields 1 to the mounting
brackets with a gap of 2 mm to the
grinding wheel 3 or 10 without com-
ing into contact with it.
EN
9
121