Technical Data - Scheppach DH1600Max Original Bedienungsanleitung

Power tool use and care
• Do not overload the device. Use the correct
power tool for your application. The correct pow-
er tool will do the job better and safer at the rate for
which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Remove the plug from the socket and/or remove
the battery before setting the device, changing
accessories or putting the device away. Such
preventive safety measures reduce the risk of start-
ing the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and Do not let people use the device if they
are not familiar with it or if they have not read
these instructions. Power tools are dangerous in
the hands of untrained users.
• Maintain the electric tool with care. Check
whether moving parts function properly and
do not get stuck and whether parts are broken
or are damaged and thus adversely affect the
electric tool function. Have damaged parts re-
paired before using the device. Many accidents
are caused by poorly maintained power tools.
• Always keep your cutting tools sharp and clean.
Properly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier
to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could re-
sult in a hazardous situation.
Service
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Safety instructions for hammers
• Wear hearing protection. Excessive noise can re-
sult in a loss of hearing.
• Use the additional handles provided with the de-
vice. Loss of control can lead to injuries.
20 | GB
• When performing work during which the tool at-
tachment can meet with concealed power lines
or its own mains cable, hold the device by the
insulated gripping surfaces. Contact with a live
power line can also electrify metal device parts and
lead to an electric shock.
Keep these safety instructions in a safe place.
Residual risks
Even when this power tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this power tool:
• Lung damage if suitable dust protection mask is not
worn.
• Hearing damage if suitable hearing protection is not
worn.
• Damage to health resulting from hand/arm vibration
if the device is used over an extended period of time
or if it is not properly operated and maintained.

6. Technical data

Mains voltage
Power consumption
Impact force
Speed
Stroke rate
Drilling capacity concrete/stone
(max.)
Protection class
Weight
Danger!
Noise and vibration
The noise and vibration levels have been determined
in accordance with EN 60745.
Sound pressure level L
Uncertainty K
Sound power level L
Uncertainty K
www.scheppach.com
pA
pA
WA
WA
230 - 240 V~
50 Hz
1600 W
10 Joule
630 min
-1
3800 bpm
40 mm
II
22 kg
87.7 dB(A)
3 dB(A)
98.7 dB(A)
3 dB(A)