whisker litter robot 4 Bedienungsanleitung Seite 31

Cleaning the Globe
1.
Press the Empty button to cycle the Globe clockwise, which will allow the litter to
fall through the Waste Port and into the Waste Drawer for easy disposal. Sweep any
leftover litter toward the Waste Port. Then, press either Cycle or Reset to return the
Globe to the Home position. Ensure that all litter has been removed from the Globe—
wet litter turns into messy clay!
2.
Turn the Litter-Robot OFF and unplug the unit.
3.
Open the Bonnet: Press and hold the buttons on both sides of the Bon net, then lift and
rotate the Bonnet to its open position.
4.
Remove the Globe: Using the handle, lift the Globe off the Base.
5.
Remove the Carbon Filter.
6.
Clean the Globe with Litter-Robot cleaner spray or wipes, or with water and a mild
soap. There are no electronic compo nents in the Globe that can be damaged by soap
and water. If the Globe has become extremely dirty, it can be soaked and cleaned
with a water hose.
7.
Let the Globe dry completely before reassembling it to the Base and closing the
Bonnet (see page 27).
For a quick touch-up, you can use Litter-Robot cleaner wipes or a disposable towelette
to wipe the inside and upper half of the Globe (without removing the litter). You can also
manually rotate the Globe to a position where the litter is behind the screen, providing access
to the Flexible Globe Liner surface for spot cleaning. The Litter-Robot can then be used
almost immediately, since drying is nearly instantaneous.
Litter-Robot cleaner spray and wipes can be ordered at litter-robot.com.
31
Handle
www.whiskersupport.com
Globe