Empty Button; Connect Button - whisker litter robot 4 Bedienungsanleitung

Reset + (Automatic Night Light)
Press the Reset button while the Globe is at the Home position with the blue Light Bar on to
reset the Cat Sensor(s). When pressed during a cycle, it will pause the cycle. If pressed again
while paused, it will abort the cycle. When pressed with the red Light Bar on, it will cancel the
Cat Sensor Wait Time and the unit will return to Ready Mode (blue Light Bar on).
A 3-second long press enables or disables Automatic Night Light Setting Mode (see page 23).
Empty Button + (Wait Time Setting)
Press the Empty button while the Globe is at the Home position with the blue Light Bar on to
start an Empty cycle (see page 17). When pressed during a Clean cycle or Empty cycle, it will
pause the cycle. Pressing the Empty button during a paused cycle will abort the cycle and
send the Globe back to the Home position.
A 3-second long press enables or disables Wait Time Setting Mode (see page 24).

Connect Button

Press the Connect button to turn WiFi ON or OFF.
1.
WiFi OFF is indicated by a white light adjacent to the Connect button.
2.
WiFi ON and connecting is indicated by a blinking blue light adjacent to the Connect
button.
3.
WiFi ON and connected is indicated by a solid blue light adjacent to the
Connect button, completing the blue Light Bar.
A 3-second long press will initiate Onboarding Mode indicated by a blinking yellow light
adjacent to the Connect button. Press and release to exit Onboarding Mode.
19
www.whiskersupport.com