Cat Presence
The Litter-Robot is equipped with a
Motion Sensor that monitors the Waste
Drawer. If the Motion Sensor identifies
movement within the Waste Drawer
while at the Home position, the unit will
rotate the Globe to a position such that
the Waste Port provides egress from the
Waste Drawer.
Drawer Full Indicator (DFI)
The Litter-Robot is equipped with a Distance Sensor looking downward from the top of the
unit that is used to detect the waste level within the Waste Drawer. During each Clean cycle,
the DFI Sensor will measure the level of waste within the Waste Drawer as the Waste Port
passes over the Waste Drawer.
When the Waste Drawer is full, the Light Bar will flash blue.
Upon the first and second
activation of the DFI, the Light
Bar will flash blue, and the Cat
Sensor(s) remain active.
Upon the third activa tion of
the DFI, the Cat Sensor(s) are
deactivated and the unit will no
longer cycle automatically.
Check or empty the Waste Drawer, then
press Reset to cancel the indicator. Press
Reset again to zero the Weight Scale. Note
that the Weight Scale also automatically
zeroes itself after each Clean cycle.
22
www.whiskersupport.com
Cat Presence
Sensor
Drawer Full
Indicator
Distance
Sensor