whisker litter robot 4 Bedienungsanleitung Seite 16

Clean Cycle
After your cat leaves the Globe, the Litter-Robot automatically performs a Clean cycle. The
sifting system separates the clumps from the clean litter and deposits them into the Waste
Drawer below. It will take 2 minutes to complete the Clean Cycle. You can also press the
Cycle button to start a Clean cycle.
During a Clean cycle, press any button to pause the cycle. Press the Cycle button to resume
the cycle. Press the Reset or Empty button to abort the cycle and return the Globe to the
Home position.
How it works:
The Litter-Robot is ready for use when the Globe is at the Home position and the Light Bar on
the Control Panel is blue.
1.
When a cat enters the Globe, the Cat Sensor(s) are activated; the blue Light Bar
changes to red.
2.
Once the cat exits the Globe, a countdown to the Clean cycle begins. When the Wait
Time (see page 24) has elapsed, the red Light Bar changes to a yellow round robin
Light Bar indicating the counterclockwise Globe rotation of the Clean cycle.
3.
As the counterclockwise rotation continues, clean litter passes through the
low-dust screen while litter clumps are separated from the clean litter. The clean
litter is collected behind the septum.
4.
During rotation, and while the Globe is upside down, an integrated weight within the
bottom of the Flexible Globe Liner causes the liner to fall away from the Globe to
ensure any stuck-on clumps are removed.
5.
As the Globe rotates toward the Dump position, the waste clumps fall through the
Waste Port into the Waste Drawer below.
6.
The Globe then stops at the Dump position and begins to rotate clockwise, back to-
ward the Home position. The Flexible Globe Liner falls back into place and clean litter
spills back into the bottom of the Globe.
7.
The Globe will rotate past the Home position to level the litter before finally
re turning to the Home position. The sequential round robin yellow Light Bar
changes to the blue Light Bar, indicating the unit is ready for the next use.
16
www.whiskersupport.com