Serial Number 54Hex; Error Code; Events - Balluff BNI IOL-75x-K007 Betriebsanleitung

4 IO-Link interface
Serial number
54hex

4.5. Error Code

4.6. Events

www.balluff.com
The serial number has the default value 16*0x00hex. To use the master validation mode
"Identity", with this Parameter are set a serial number. This prevents that a Device will be
connected to a wrong master.
Error Code
0x8011
0x8012
0x8023
0x8030
0x8031
0x8032
0x8033
0x8034
0x8035
IO-Link Revision 1.0
Event Code
0x5112
0x5114
0x5151
IO-Link Revision 1.1
Event Code
0x5111
0x5112
0x7710
Description
Index not available
Subindex not available
Access Denied
Parameter Value out of Range
Parameter Value above limit
Parameter Value below limit
Parameter length overrun
Parameter length underrun
Function not available
Description
Low sensor voltage (US)
Low actor voltage (UA)
Short circuit output stages
Description
Low sensor voltage (US)
Low actor voltage (UA)
Short circuit output stages
12