Display - SMA SUNNY TRIPOWER STORAGE 60 Installationsanleitung

SMA Solar Technology AG

6.3 Display

INFORMATION
It may take some time until the display responds after
switching on.
The display gives the user access to information about the
inverter.
Figure 28: Display buttons and functionality
Display buttons and functionality
Button
F1
F2, F3 and F4
Home
Ok
Up arrow
Down arrow
Arrow right
Arrow left
Back
On – green LED
Alarm – red LED
Installation Manual
Function
Adjust the contrast level of
display. Use arrow up/down
button while pressing the F1
button.
No function
Return to main screen
No function
A step up
A step down
Toggles screen right
Toggles screen left
Return to main screen
-
-
The screen design is divided into different sections:
1. Main screen. Current and daily yield.
This section contains:
– Actual output power (kW)
– Daily energy (kWh)
– Total energy (kWh)
– Current date.
– Current time
– Operating mode (#)
2. Inverter information. This section contains:
– Inverter device type
– Inverter name
– Inverter serial number
– IP Address
– Serial number of the SMA Inverter Manager
– Software version of the inverter
3. Actual values This section contains:
– DC voltage and current
– Phase-to-phase voltages
– Phase currents
– Grid frequency
6 User Interface
STPS60-IA-xx-13 31