Adjusting The Feet; Electrical Connection; Changing Door Opening Direction - Beko B5RFNE314W Bedienungsanleitung

Installation
• Condenser of your refrigerator is on
the rear side. In order to increase
the energy efficiency by minimizing
the power consumption, the upper
part of the condenser on the rear
side of the product must be pulled
backwards and locked as shown in
the figure. When the condenser is
pulled back, the right and left upper
holders are locked and the position of
the condenser is fixed.

4.2.Adjusting the feet

If the product is unstable on the place
where it is placed, adjust it by turning
the front adjustment feet to the right or
left.

4.3.Electrical connection

WARNING: Do not make
A
connections to the extension
cords or multiple sockets.
WARNING: Damaged power
B
cable must be replaced by an
Authorized Service.
If two refrigerators are placed
side by side, there should be
C
at least 4 cm space between
them.
• Our company will not be liable for
any damages that occur when the
product is used without grounding
and electrical connections that are
according to national regulations.
• The power cord plug must be easily
accessible after installation.
• Connect your refrigerator to an outlet
with a ground line with 220-240V/50
Hz voltage. Plugs should have a 10-16
A fuse.
• Do not use multi-group socket with or
without extension cable in between
your refrigerator and the wall outlet.
4.4.Changing door
opening direction
Based on where you use, your
refrigerator's door opening direction can
be changed. When you need this, please
contact your nearest Authorized Service
Point.
12 / 30 EN
Freezer/User Manual