Tool Specifications; Intended Use; Machine Elements; For Your Safety - Bosch PST 14,4 V Bedienungsanleitung

Tool Specifications

Jigsaw
Order number
Rated voltage
Stroke rate at no-load
Stroke
Cutting capacity
(max.):
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right)
Weight with battery
(without accessories)
approx.
Battery
Order number
Temperature control
Rated voltage
Capacity
Weight, approx.
Please observe the order number of your machine. The
trade names of the individual machines may vary.

Machine Elements

1 Switch lock
2 On/Off switch
3 Battery*
4 Battery unlocking button
5 Saw blade storage
6 Base plate
7 Lever for adjustment of pendulum action
8 Guide roller
9 Saw blade*
10 SDS clamping lever for saw blade release
11 Contact protector
12 Stroke rod
13 Scale
14 Screwdriver**
15 Angle gauge**
16 Screw
17 Thread
18 Notch
19 Holder
20 Splinter guard
21 Circle Cutter/Parallel Guide*
** Commercially available (not included in the delivered
items)
* Not all of the accessories illustrated or described are
included as standard delivery.
9 • 2 609 932 131 • 02.03
PST 14,4 V
0 603 384 4..
[V=] 14.4
[spm] 0 – 2100
[mm] 23
[mm] 65
[mm] 10
[mm] 4
[°] 0 – 45
[kg] 2.4
NiCd
2 607 335 276
NTC
[V=] 14.4
[Ah] 1.3
[kg] 0.6
English - 1

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served. Before using for the first
time, ask for a practical demon-
stration.
Wear safety goggles.
When working, never guide a hand or fingers
in front of the saw blade.
Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
The rated voltage of the battery must agree
with the data on the machine.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) and when
storing the machine, remove the battery.
Before inserting the battery and for tool
change, always ensure that the button of the
switch lock 1 is in the
symbol), thus securing the On/Off switch 2
against unintentional actuation.
Always remove the battery for transportation of
the machine: Danger of injury through uninten-
tional starting when actuating the On /Off
switch!
Convince yourself before using that the battery
is securely seated in the machine.
Do not strain the machine so heavily that it
comes to a standstill.
Do not work with materials containing asbes-
tos.
Apply the machine to the workpiece only when
switched on.
position (press at