Tool Specifications; Intended Use; Machine Elements; Noise/Vibration Information - Bosch Rotocut plus Bedienungsanleitung

EURO • Printed in USA • BA 2 610 915 173 • Rotocut plus • GB • OSW 02.05
2 610 915 173.book Seite 1 Donnerstag, 23. Mai 2002 1:24 13

Tool Specifications

Rotocut plus
Order number
Rated power* [W]
No-load speed [rpm] 25 000/30 000
Collet Ø [mm] 3.2 (1/8")
Collet Ø [mm] 6.4 (1/4")
Weight (without
accessories) approx. [kg]
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.
* The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific coun-
tries, these values can vary.

Machine Elements

1 Auxiliary handle
2 Spindle lock button
3 Tightening nut
4 Collet 3.2 mm (1/8")*
Collet 6.4 mm (1/4")*
5 Wing screw for depth-of-cut adjustment
6 Adjustable base plate
7 Extraction neck (for hose Ø 19 mm)*
8 Guide bushing*
9 On/Off switch
10 Lever for mounting of auxiliary handle
11 Cover
12 Open-end spanner
13 Clamping lever for fastening of base plate
14 Circle cutter*
15 Arm of the circle cutter
16 Spring key
17 Centring pin
18 Fastening screw for handle
19 Handle for circle cutter
20 Locking nut for für centring pin
* Not all of the accessories illustrated or described are
included as standard delivery.
11 • 2 610 915 173 • TMS • 21.05.02

Intended Use

The machine is intended for cutting plaster,
wood, Plexiglas, plastics and ceramics.
0 601 638 3..
550

Noise/Vibration Information

Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level
1.2
of the product is 79 dB (A).
/ II
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below
2.5 m/s
s Wear safety goggles and dust mask.
s Keep hands away from the rotating cutting
tool.
s Sharp-edged tool inserts. Danger of injury!
s If the mains cable is damaged or cut
through while working, do not touch the ca-
ble but immediately pull the mains plug.
Never use the machine with a damaged ca-
ble.
s Insert the mains plug only when the ma-
chine is switched off.
s Always direct the cable to the rear away
from the machine.
s Do not work with materials containing as-
bestos.
English - 1
2
.
For Your Safety
Working safely with this ma-
chine is possible only when
the operating and safety infor-
mation are read completely
and the instructions
tained therein are strictly fol-
lowed. In addition, the general
safety notes in the enclosed
booklet must be observed. Be-
fore using for the first time,
ask for a practical demonstra-
tion.
con-