Change Setback Temperature - Daytime; Change Setback Temperature - Nighttime; Change Number Of Hours - Daytime; Change Number Of Hours - Nighttime - Mill IB250 Bedienungsanleitung

Change setback temperature — daytime
See figure 12 on separate illustration sheet
○
Press and hold and press
Enter the desired temperature for daytime setback. Save by pressing
seconds for automatic confirmation.
Change setback temperature — nighttime
See figure 13 on separate illustration sheet
○
Press and hold and press
Enter the desired temperature for nighttime setback. Save by pressing
seconds for automatic confirmation.
Change number of hours — daytime
See figure 14 on separate illustration sheet
○
Press and hold and press
Enter the desired number of hours for daytime setback. Save by pressing
seconds for automatic confirmation.
Change number of hours — nighttime
See figure 15 on separate illustration sheet
○
Press and hold and press
Enter the desired number of hours for nighttime setback. Save by pressing
15 seconds for automatic confirmation.

Cancel (skip) setback period

See figure 16 on separate illustration sheet
○
Press and hold and press
want to cancel).
*The heater will skip an active setback period or the next setback period.
*During the next setback period, the heater will automatically resume the programmed
temperature reduction.
Delete a setback program
See figure 17 on separate illustration sheet
☉
Press and hold or
seconds.
☉
3 times.
☾
3 times.
☉
2 times.
☾
2 times.
☉ ☾
or once (depending on which setback period you
☾
(depending on which setback period you want to cancel) for 3
○
or wait for 15
○
or wait for 15
○
or wait for 15
○
or wait for
11