Before first use
After unpacking the heater, check to make sure the product was not damaged during
transport. Contact the retailer or importer if you discover any visible damages to the
product.
Keep the outer packaging to transport the heater in the future. If you want to dispose the
packaging, make sure it is done properly. Keep plastic bags away from children.
First use
After turning on the heater for the first time or after an extende the heater can produce a
burnt odor for a short time. This is normal. Please read all the instructions carefully before
use. Save the instruction manual for future use.
It is also normal for the heater to make "sounds" when it warms up or cools down.
Minimum distances
100 mm
50 mm
100 mm in front
of heater
100 mm
Description of heater
A
See figure 1 on separate illustration sheet
MILL INVISIBLE
1. On/Off
2. Wall bracket
3. Temperature sensor
4. Heat emission
5. Thermostat
6. Steel front
50 mm
B
MILL GLASS
1. On/Off
2. Wall bracket
3. Temperature sensor
4. Heat emission
5. Thermostat
6. Glass front
5