Advanced Mode - Mill IB250 Bedienungsanleitung

10 millnorway.com

Advanced mode

If you want to have different temperature settings each day, you may use advanced mode.
To activate advanced mode you need to activate day and night setback first.
See figure 18 on seperate illustration sheet.
How to activate advanced mode for daytime setback:
1. Press and hold
2. "dl" (day one) will be visible W he display, and you may now choose the temperature
you want for Monday. Confirm by pressing
3. "0 C" will flash in the display. Use the + and - buttons to set the temperature for
daytime setback. Confirm by pressing
4. "H" will flash in the display. Use the + and - buttons to set the number of hours as
desired setback period. Confirm by pressing
5. "SR" will be visible in the display. Now you have the option to set the time of day
that you want the setback time to start. You may choose from -4 hours to +4 from
the time your daytime setback normally starts. Meaning, if your daytime setback
normally starts at 10:30, but you want the setback time to be activated 08:30 every
Monday, you may use the - button to set "-2" (hours). Confirm by pressing
6. "d2" (day 2) which is Tuesday, will now be visible in the display and you may do the
same procedure to set the desired temperature for Tuesday. Keep repeating the
same procedure for all 7 days.
How to activate advanced mode for nighttime setback:
1. Press and hold
2. "dl" (day one) will be visible in the.JJLsplay, and you may now choose the temperatu-
re you want for Monday night. Confirm by pressing
3. "0 C" will flash in the display. Use the + and - buttons to set the temperature for
nighttime setback. Confirm by pressing
4. "H" will flash in the display. Use the plus and minus buttons to set the number of
hours as desired setback period. Confirm by pressing
5. "SR" will be visible in the display. Now you have the option to set the time of night
that you want the setback time to start. You may choose from -4 hours to +4 hours
from the time your nighttime setback normally starts. Meaning, if your nighttime set-
back normally starts at 22:00, but you want the setback time to be activated 21:00
every Monday, you may use the - button to set "-1" (hour). Confirm by pressing.
6. "d2" (day 2) will now be visible in the display and you may do the same procedure to
set the desired temperature for Tuesday. Keep repeating the same procedure for all
7 days.
☉
, then press+ one time.
☾
, then press + one time.
○
○
○
○
○
○
○