Updating The Firmware Of The Controller - Hacker HST-50 Betriebsanleitung

In the picture below you can see an example of how the operation is displayed in the GUI. Accor-
dingly, you can follow all important parameters such as speed, current, voltage, temperatures, etc.
live.
NOTE
Changing parameters
Changing the parameters requires sound specialist knowledge. Incorrect parameters
can lead to the destruction of the drive and cause consequential damage.
If you are not sure about the tuning of your drive, contact our industrial depart-
ment:
his@hacker-motor.com

7.1 Updating the firmware of the controller

As we are subject to a continuous improvement process, we have created the possibility for firm-
ware updates. If you are affected by such an update, please proceed as follows:
Brushless DC Controller HST-50
Orginal operating manual
Operation of the graphical user interface / accessories
Page 42 of 48
Rev1.2