HBM SomatXR Kurzanleitung Seite 15

- MX1609KB-R thermocouple amplifier and MX1609TB-R thermocouple
amplifier: Up to 16 thermocouples type K (Ni-CrNi) or respectively 16
thermocouple type T (Cu-CuNi) can be connected to the respective mod­
ules for measuring temperatures.
- MX1615B-R bridge module (strain gage amplifier): Up to 16 individually
configurable inputs, including strain gage-based transducers, standard­
ized voltage and resistance or resistance-based measurements.
- MX840B-R universal module: Up to eight (8) universal inputs for connect­
ing more than 16 transducer technologies including one connector com­
patible with CAN inputs.
- MX411B-R highly dynamic universal module: Up to four (4) inputs, includ­
ing strain gage and inductive bridges, standardized voltage and DC cur­
rent sources (20 mA) or current-fed piezoelectric (IEPE, ICP®) and
piezoresistive transducers.
- MX460B-R frequency / counter module: Up to four (4) digital inputs to
measure digital pulses up to 1 MHz (speed, torque, angle position, dis­
placement, PWM in general).
- MX471B-R CAN module: Up to four (4) independent CAN bus nodes
electrically isolated from each other and from the power supply.
- MX471C-R CAN FD module : Up to four (4) independent CAN / CAN FD
bus nodes electrically isolated from each other and from the power sup­
ply. The module can also be used as a gateway to connect to multiple
SomatXR modules via FireWire and to a PC via Ethernet.
- MX590B-R pressure acquisition module: Configurable with up to five (5)
individual pressure transducers. Pressure measurement: absolute, up to
10 bar; relative, up to 25 bar.
S CX22B-R Data Recorder: The CX22B-R is shipped with the pre-installed
catman Easy DAQ software package for test parameterization, visualization
and data analysis in the field. The acquired test data is stored on the inte­
grated SSD memory.
SomatXR
A04087_07_Z00_00 HBM: public
Getting Started
13