Troubleshooting; Service Data - Electrolux EB7L4XCN Benutzerinformation

Turn off the oven. Wait un‐
til the oven is cold.
Top lamp
Step 1
Step 2
Step 3
Step 4

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table
please contact with an Authorised
Service Centre.
Problem
The oven does not
heat up.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Before you replace the lamp:
Step 1
Disconnect the oven from
Turn the glass cover to remove
it.
Clean the glass cover.
Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat-resistant
lamp.
Install the glass cover.
Check if...
The fuse is blown.
Step 2
the mains.
Problem
The lamp does not
work.

12.2 Service data

If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
ENGLISH
Step 3
Put a cloth on the bottom
of the cavity.
Check if...
The lamp is burnt
out.
63