Electrolux EB7L4XCN Benutzerinformation Seite 44

44 www.electrolux.com
7.2 How to set: Clock functions
How to change: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a
power cut or when the timer is not set.
In case of a power cut up to 1 h, the time of day is shown and
that the time is correct and press
Step 1
Step 2
- press repeatedly to change the time of day.
How to set: Duration
Step 1
Step 2
Step 3
Step 4
Step 5
How to set: Minute Minder
Step 1
Step 2
Step 3
Step 4
How to cancel: Clock functions
Step 1
Step 2
- press repeatedly.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the
time.
Set an oven function and the temperature.
- press repeatedly.
, - press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven
turns off.
Press any button to stop the signal.
Turn the knobs to the off position.
- press repeatedly.
, - press to set the time.
The function starts automatically after 5 sec.
When the set time ends, the signal sounds.
Press any button to stop the signal.
Turn the knobs to the off position.
- press repeatedly until the clock function symbol starts to flash.
Press and hold: .
The clock function turns off after few seconds.
to stop the flashing.
- starts to flash.
- starts to flash.
- starts to flash.
.
- starts to flash.
flashes. Make sure