Technical Data; Specifications For Approved Extension Cords - Meec Tools 009875 Bedienungsanleitung

10

Technical data

Technical data
Rated voltage
Power output
Safety class
Protection rating
Maximum pump pressure
Maximum working pressure
Maximum flow
Maximum inlet pressure
High-pressure hose length
Power cord length
Fuse
Dimensions
Weight
Sound pressure level (LpA)
Sound power level, measured
(LwA)
Sound power level, guaranteed
(LwA)
Vibration
1
Warning! The actual vibration and noise level when
using tools may differ from the specified maximum value,
depending on how the tool is used and the material. It is
therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of
exposure in actual operating conditions (taking into account
all stages of the work cycle, e.g. the time when the tool is
switched off and when it is idling, in addition to the start-up
time).
1
The declared values for vibration and noise, which have
been measured according to a standardized test method,
can be used to compare different tools with each other
and for a preliminary assessment of exposure. The meas-
urement values have been determined in accordance
with EN 62335-2-79.
41
230 V ~ 50 Hz
1600 W
II
IPX5
140 bar
95 bar
6.8 l/min, 408 l/h
7 bar/0.7 MPa
5 m
5 m
16 A
310 x 310 x 750 mm
7.33 kg
74.7 dB(A), K = 3 dB
87.9 dB(A), K = 3 dB
92 dB(A), K = 3 dB
1.8 m/s², K = 1.5 m/s²
10.1 Specifications for approved
extension cords
Warning! Only use extension cords that comly with
the specifications in the table below.
Cross-sectional area
1.0 mm²
1.5 mm²
2.5 mm²
Maximum length
12.5 m
20 m
30 m
2022_001